- Engineered blend of cellulose fibers and perlite for optimal filter aid performance
- Provides a stable, porous filtration layer with excellent particle retention
- Enhances filtration flow rates while minimizing clogging and pressure buildup
- Ideal for pre-coat filtration systems, including rotary drum and vacuum filters
- Free of diatomaceous earth — safer handling and reduced environmental impact
AEB Fibroxcel 30 is a high-performance filtration aid composed of purified cellulose fibers and perlite, specifically designed to improve clarity and flow in wine, cider, juice, and other beverage filtration. Used as a pre-coat layer, Fibroxcel 30 creates a uniform, porous structure that traps particulates while maintaining excellent permeability and minimizing pressure increases. It’s particularly effective on rotary drum vacuum filters and other pre-coating systems where filter cake stability and throughput are critical. As a non-DE alternative, it offers safer handling, easier disposal, and improved environmental compatibility.
Usage Protocol
- Fibroxcel 30 is typically used to form a pre-coat layer on filter surfaces prior to filtration.
- May also be used in combination with finer grades (e.g., Fibroxcel 15 or 20) for multi-stage filtration setups.
- Pre-mix with clean water or product before dosing into the filtration system.
Dosage Guidelines(Generic – adjust based on system and turbidity)
| Application Type | Typical Dosage |
| Pre-coat layer | 300–600 g/m² of filter surface |
| Body feed (if applicable) | 0.1–0.3 g/L of product being filtered |
Note: Dosage depends on the type of filtration system, product load, and desired clarity. Always conduct pilot trials to fine-tune use rates.