- 25 Feet of 3/8" Copper
- Coils Raised Up To Where The Heat Is
- Integrated Turbulator
- Cools Faster and Uses 40% Less Water
- 25 Feet of 3/8" Copper
- Includes Tubing and Standard Garden House / Utility Sink Thread
- Manufactured in the USA
Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers. But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better.
ALL of our chillers feature coils that raised up to where the heat is. As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination... neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.
Constructed from 25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE21S hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by.
This size chiller is ideal for our 8 Gallon Heavy Duty Kettles!
The measurements are: Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.