- 304 stainless steel splash resistant construction
- Industrial design using commercial quality components for long life and easy serviceability
- On/Off thermostat control
- Outlet fully disconnected when powered off for added safety, unlike some one-leg designs
- Wall mount bracket allows you to get the controller off the table and out of the way
Keep your temps tight with the BrewBuilt™ HLT Controller! Perfect for keeping your sparge water or mash water at your set temperature—it allows you to control a 208-240V heating element up to 30 amps based on temperature. The controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand on the wall at eye-level. We highly recommend mounting the controller so you don't have to worry about keeping an area of your table dry where you might lay it down. L6-30 connections with 4 ft. cords on either end. Compatible with all 208-240V elements 30 amps and lower. While L6-30 are the most common elements available, yours may need an adapter. Uses a 9' stainless braided PT-100 temperature sensor.
The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in.
If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.
**Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one .**